Sharp R-440/540 Manual do Operador descarregar pdf (Página 83)

918496/GP0313 75

Note: When the parking brake is engaged,

travel drive is disabled.

4. Use the drive direction switch to change

the loader drive direction.

Note: The drive direction indicators should

be lit when the drive direction switch is in

forward and rearward positions.

5. (AL 300, AL 400, AL 500 Series) Select either the high or low drive speed

using the slow/fast speed switch (H, Fig. 34) according to the job and work

site conditions.

6. Slowly press the accelerator pedal. Driving speed is proportional to accelera-

tor pedal movement.

Travel cautiously and under complete control

at all times. Avoid sudden directional changes

while traveling.

Note: (AL 400/500 Series) Sluggish or inoperative throttle pedal control could

indicate the throttle pedal is out of calibration. See your local service center for

throttle pedal calibration.

Important: If the machine is equipped with a hand throttle, use the accelerator

pedal to control travel speed and use the hand throttle to control engine speed.

See “Hand Throttle” on page 61.

7. Use the brake/inch pedal gradually to regulate travel speeds and braking.

Important: Do not use the brake/inch pedal as a footrest.

Note: (AL 400/500 Series) Sluggish or inoperative brake/inch pedal control

could indicate the brake/inch pedal is out of calibration. See your local service

center for brake/inch pedal calibration.

Drive direction switch position

Forward

Indicator for forward drive

is on; loader drive is in for-

ward.

Middle Loader drive is in neutral.

Rearward

Indicator for reverse drive

is on; loader drive is in

reverse.

Figure 34 – Drive Direction

and Fast/Slow Speed

Switches

Forward

Reverse

ForwardNeutral

WARNING

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 179 180

Comentários a estes Manuais

Sem comentários

Sharp R-440/540 Manual do Operador Página 83

Comentários a estes Manuais

Manuais e produtos relacionados com Micro-ondas Sharp R-440/540