Sharp R-440/540 Manual do Operador descarregar pdf (Página 81)

918496/GP0313 73

5. On AL 500 Series machines:

a. Remove the retainer (C, Fig. 30), and lift the cylinder stop channel (D) off

the machine.

b. Tilt the attachment/hitch back as required and place the cylinder stop

channel (D) under tilt indicator (J) and over the tilt cylinder (E) to brace

the tilt cylinder in the extended position.

c. Replace the retainer (C) into the cylinder stop channel so it passes under

the tilt cylinder rod.

d. Lower the lift arm as low as possible, but still high enough for required

ground clearance.

6. On AL 400 Series machines:

a. Remove the quick-release pins (F, Fig. 31), and remove the tilt lock pin

(G) from the front of the machine.

b. Tilt the attachment/hitch as required to align holes (H) in tilt bracket with

holes (I) in both sides of the lift arm.

c. Slide tilt lock pin (G) through holes (H) and (I) so it passes all the way

through both sides of the lift arm and tilt bracket. Secure tilt lock pin (G)

at both ends with spring pins (F)

d. Lower the lift arm as low as possible, but still high enough for required

ground clearance.

Figure 30 – Tilt Lock Mechanism (AL 500 Series)

Figure 31 – Tilt Lock Mechanism (AL 400 Series)

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 179 180

Sem comentários

Sharp R-440/540 Manual do Operador Página 81