Sharp R-440/540 Manual do Operador descarregar pdf (Página 69)

918496/GP0313 61

Control Lever

(AL 300, AL 400, AL 500 Series; AL 100 (EU), AL 200 Series Optional)

The control lever on the steering column controls the following functions:

1. Push the control lever in to activate the horn (K, Fig. 15).

2. Twist the end of the control lever

to activate the position lights (L).

3. Push the control lever forward or

rearward to activate the turn sig-

nals (M).

4. Push the control lever downward

to activate the road light “high”

beams.

5. Pull the control lever upward to

activate the road light “low”

beams.

Hand Throttle

(AL 300, AL 400, AL 500 Series)

The hand throttle, located to the right of the operator’s seat, controls engine speed

independently from the accelerator pedal. The hand throttle does not control

travel speed.

1. Loosen the throttle lock ring (N, Fig. 16).

2. Press the red throttle release button (P).

3. Pull/push the throttle control

knob (R) and the throttle release

button as a unit.

Note: The throttle can be quickly

placed into the idle position by firmly

pushing against the throttle release

button. For normal operation, move

the throttle release button (P) and the

throttle control knob (R) as a unit to

prevent undue wear on the throttle

mechanism.

4. For fine adjustments, rotate the

throttle control knob (R).

5. Tighten the throttle lock ring (N)

to lock the throttle in position.

Figure 15 – Control Lever

Figure 16 – Hand Throttle

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 179 180

Sem comentários

Sharp R-440/540 Manual do Operador Página 69