Sharp R-440/540 Manual do Operador descarregar pdf (Página 68)

60 918496/GP0313

Seat Belt

Always fasten the seat belt securely and

properly. Never operate the machine without

the seat belt fastened around the operator.

Important: Inspect the seat belt for damage before use. Replace if damaged.

Keep the seat belt (E, Fig. 12) clean. Use only soap and water to wash seat belt.

Cleaning solvents can damage seat belt.

Ignition Key Switch

“0” position: All power off. Key can be

inserted/removed.

“I” position: Run position.

“II” position: Start position. Holding the

switch in this position starts the engine. See

“Engine Start” on page 67.

Note: Switch must be returned to “0” posi-

tion between starting attempts to reset the

start safety interlock.

Important: The drive direction switch on the

joystick must be in the neutral position and the operator’s seat must be occupied

and/or the parking brake must be applied before the engine will start.

Steering Column Adjustment

(AL 300, AL 400, AL 500 Series; AL100 (EU), AL 200 Series Optional)

Never adjust the steering column when the

engine is running.

Adjust the steering column for visibility, utility and comfort.

1. Push the adjustment lever (J, Fig.

14) downward.

2. Adjust the steering column to the

desired position.

3. Release the adjustment lever.

4. Check that the steering column is

locked in place.

WARNING

Figure 13 – Ignition Key

Switch

WARNING

Figure 14 – Steering Column Adjust-

ment

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 179 180

Sem comentários

Sharp R-440/540 Manual do Operador Página 68