Sharp R-440/540 Manual do Operador descarregar pdf (Página 121)

918496/GP0313 113

Accessing the Outer and Inner Filter Elements

1. Perform the “Mandatory Safety Shutdown Procedure” on page 10.

2. Open the engine cover.

3. Unlatch the clamps on the air cleaner housing and remove the element cover.

4. Clean any debris from the cover.

Changing the Filter Elements

1. Perform the “Mandatory Safety Shutdown Procedure” on page 10.

2. Carefully remove the outer filter element (F, F i g . 7 8 ). Do not remove the inner

filter element (G) unless it is to be replaced. If the inner filter element will not

be replaced, skip to step 8.

3. Before removing inner filter element (G) from the housing, clean away any

dirt built up in the housing. Leave the inner filter element installed during this

step to prevent debris from entering the engine intake manifold.

4. Remove the inner filter element.

5. Clean dust and debris from housing (E) and cover (C). Leave the inner filter

element installed during this step to prevent debris from entering the engine

intake manifold.

6. Check the inside of the housing for any damage that may interfere with the

elements.

7. Remove the old inner filter element and install the new inner filter element.

8. Reinstall/replace the outer filter element.

9. Latch clamps (D) to secure cove (C).

10. Check the hose connections and be sure they are all clamped and tightened

properly.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 179 180

Sem comentários

Sharp R-440/540 Manual do Operador Página 121