Sharp R-440/540 Manual do Operador descarregar pdf (Página 135)

918496/GP0313 127

Changing Axle Oil (AL 200 and AL 100 Series)

1. Position waste oil collection containers, with capacities of at least 5 liters (5

quarts) underneath the axle centers to catch oil as it drains.

2. Thoroughly clean around axle drain

plugs (M, Fig. 98) and remove the

plugs.

3. Thoroughly clean around axle fill

plugs (O) and remove the plugs. Allow

the oil to completely drain.

Important: Always dispose of waste oil

according to environmental laws or take

to a recycling center for proper disposal.

DO NOT pour onto the ground or down a

drain.

4. Thoroughly clean axle drain plugs.

Replace and tighten the plugs.

5. Add oil through the oil fill holes (O)

until it reaches the bottom of the

holes. See “Fluid Capacities/Lubri-

cants” on page 31 for the specific oil

type and grade.

6. Thoroughly clean fill plugs (O).

Replace and tighten the plugs.

Figure 98 – Axle Oil Drain/Fill

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 179 180

Sem comentários

Sharp R-440/540 Manual do Operador Página 135