Sharp R-440/540 Manual do Operador descarregar pdf (Página 33)

918496/GP0313 25

ANSI-Style and Common Safety Decal Locations (Cont.)

Note: Refer to Fig. 4 on page 22 for decal locations.

WARNING: Avoid Injury or Death

• ALWAYS wear seatbelt.

• No riders! Never use work tool

as work platform.

• Keep out from under lift arm

unless lift arm is supported.

• Operate only from operator’s

seat.

• Prevent load rolling down lift

arm onto operator.

WARNING: Avoid Overturn

Side stability is reduced when:

1) turning; 2) operating on rough

terrain or side slopes; and 3)

carrying load raised.

• Carry load low.

• Do not exceed Rated Operating

Capacity.

• Avoid steep slopes and high speed

turns.

• Travel up and down slopes with

heavy end uphill.

Located on the left side of the con-

trol column.

IMPORTANT

• Located on top of the radiator inside the

engine compartment.

• Do not use ether or other starting fluids to

start this engine — warranty may be voided.

WARNING

STOP

274507

Always follow "Mandatory

Safety Shutdown Procedure."

AVOID INJURY OR DEATH

1. Lower equipment to ground.

2. Reduce throttle, apply parking

3. Shift to neutral.

4. Stop engine, remove key.

brake.

WARNING: Avoid Injury or Death

Always follow “Mandatory Safety Shutdown Procedure.”

1) Lower equipment to ground.

2) Reduce throttle, apply parking brake.

3) Shift to neutral.

4) Stop engine, remove key.

Located on the control column, facing the operator.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 179 180

Comentários a estes Manuais

Sem comentários

Sharp R-440/540 Manual do Operador Página 33

Comentários a estes Manuais

Manuais e produtos relacionados com Micro-ondas Sharp R-440/540