Sharp R-440/540 Manual do Operador descarregar pdf (Página 118)

110 918496/GP0313

Changing Engine Oil and Filter

Change the engine oil and filter after the

first 50 hours of use, and every 250 hours

thereafter.

1. Position the machine on a level sur-

face.

2. Perform the “Mandatory Safety Shut-

down Procedure” on page 10.

3. Wait until the machine has cooled. See

“Service Safety Practices” on page 16.

4. Remove the engine access panel (A,

Fig. 74).

Notice: Removing engine access panel requires two people.

5. Position a waste oil collection con-

tainer to catch draining oil (B, Fig.

75).

Important: Dispose of waste engine oil

according to environmental laws or take

to a recycling center for proper disposal.

DO NOT pour waste engine oil onto the

ground or down a drain.

6. Remove the drain plug (C, Fig. 76)

from the oil pan and allow the oil to

drain into the waste oil collection con-

tainer.

7. Remove the oil filter, using a filter

wrench as necessary.

8. Put clean oil on the new oil filter

gasket. Install the filter and tighten 3/4

turn past the point where the gasket

contacts the filter head.

9. Reinstall and tighten the drain plug.

10. Reinstall the engine access panel (A,

Fig. 74).

Notice: Reinstalling engine access panel

requires two people.

Figure 74 – Engine Access

Panel

Figure 75 – Waste Oil Collec-

tion Container

Figure 76 – Oil Pan Drain Plug

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 179 180

Sem comentários

Sharp R-440/540 Manual do Operador Página 118