
Important Notes • 11
Standards and Regulations for Operating the 750 Series
WAGO-I/O-SYSTEM 750
Bus System
1.2 Standards and Regulations for Operating the 750 Series
Please observe the standards and regulations that are relevant to your
installation:
• The data and power lines must be connected and installed in compliance
with the standards to avoid failures on your installation and eliminate any
danger to personnel.
• For installation, startup, maintenance and repair, please observe the
accident prevention regulations of your machine (e.g. BGV A 3,
"Electrical Installations and Equipment").
• Emergency stop functions and equipment must not be made ineffective.
See relevant standards (e.g. DIN EN 418).
• Your installation must be equipped in accordance to the EMC guidelines
so that electromagnetic interferences can be eliminated.
• Operating 750 Series components in home applications without further
measures is only permitted if they meet the emission limits (emissions of
interference) according to EN 61000-6-3. You will find the relevant
information in the section on "WAGO-I/O-SYSTEM 750" ! "System
Description" ! "Technical Data".
• Please observe the safety measures against electrostatic discharge
according to DIN EN 61340-5-1/-3. When handling the modules, ensure
that the environment (persons, workplace and packing) is well grounded.
• The relevant valid and applicable standards and guidelines concerning the
installation of switch cabinets are to be observed.
Comentários a estes Manuais