
14. USING A LINEAR SERVO MOTOR
14 - 8
(3) Linear encoder resolution setting
Set the ratio of the electronic gear to the linear encoder resolution with [Pr. PL02 Linear encoder
resolution numerator setting] and [Pr. PL03 Linear encoder resolution denominator setting].
POINT
To enable the parameter value, cycle the power after setting.
(a) Parameter setting
Set the values that apply to the following equation.
[Pr.PL02 ࠾ࠕࠛࡦࠦ࠳ಽ⸃⢻⸳ቯ ಽሶ]
[Pr.PL03 ࠾ࠕࠛࡦࠦ࠳ಽ⸃⢻⸳ቯ ಽᲣ]
= Linear encoder resolution [μm]
(b) Parameter setting example
When the linear encoder resolution is 0.5 μm
[Pr.PL02]
[Pr.PL03]
= Linear encoder resolution = 0.5 μm =
2
1
The following shows the simplified chart for the setting values of [Pr. PL02] and [Pr. PL03].
Linear encoder resolution [μm]
0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0
[Pr. PL02] 1 1 1 1 1 1 1 2
Setting
value
[Pr. PL03] 100 50 20 10 5 2 1 1
POINT
If an incorrect value is set for [Pr. PL02] or [Pr. PL03], the linear servo motor
may not operate properly, or [AL. 27] or [AL. 42] may occur at the positioning
operation or the magnetic pole detection.
14.3.2 Magnetic pole detection
Before the positioning operation of the linear servo motor, make sure to perform the magnetic pole detection.
When [Pr. PL01] is set to the initial value, perform the magnetic pole detection only at the first servo-on after
the power is turned on.
The magnetic pole detection includes the following two methods. Each method has advantages and
disadvantages. Select a magnetic pole detection method suitable for your usage.
The position detection method is selected in the initial setting.
Magnetic pole detection Advantage Disadvantage
Position detection method 1. The magnetic pole detection has a
high degree of accuracy.
2. The adjustment procedure at the
magnetic pole detection is simple.
1. The travel distance at the
magnetic pole detection is large.
2. For equipment with small friction,
the initial magnetic pole detection
error may occur.
Minute position detection method 1. The travel distance at the
magnetic pole detection is small.
2. Even for equipment with small
friction, the magnetic pole
detection is available.
1. The adjustment procedure at the
magnetic pole detection is
complex.
2. If a disturbance occurs during the
magnetic pole detection, [AL. 27
Initial magnetic pole detection
error] may occur.
[Pr. PL02 Linear encoder resolution numerator setting]
[Pr. PL03 Linear encoder resolution denominator setting]
[Pr. PL03]
[Pr. PL02]
Comentários a estes Manuais