Sharp SF-1116 Manual de Serviço descarregar pdf (Página 61)

D. Note for toner hopper drive gear (31T) and stirring

shaft attachment

• Be careful of the stirring shafts A and B attachment positions.

Attach so that the angle between stirring shaft A and B is 90

degrees.

• When attaching the toner hopper drive gear (31T), be careful of

the E-ring stop position as shown below. (If the E ring is on the

milled surface, it is apt to disengage.)

8.Operation panel/intermediate cabinet

1 Open the front cabinet.

2 Remove two screws A, two screws B, and two harnesses con-

nected to the operation panel unit.

2 Remove the operation panel unit.

3 Remove the process cover unit, remove six screws C and two

connectors, and remove the intermediate cabinet.

9. Frame major parts

9-1. Cooling fan motor replacement

A. Cooling fan motor removal

Remove the original cover, the original guide, the upper cabinet

left, and the upper cabinet right.

Stirring shaft B

31T gear

6 – 21

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 124 125

Sem comentários

Sharp SF-1116 Manual de Serviço Página 61