Sharp SF-1116 Manual de Serviço descarregar pdf (Página 59)

6-5. Discharge lamp unit (Clean every 60K copies.)

1 Remove three blue screws which are fixing the process unit

holder, slide the holder and remove it.

2 Remove the discharge lamp unit. (one screw, one connector)

6-6. Cleaner blade (Replace every 60K copies.)

1 Remove the holder from the process unit. (3 blue screws)

2 Remove the cleaning blade. (3 blue screws)

6-7. Drum separation pawl (Replace every 60K

copies.)

Slide and remove the blue pin to remove the separation pawl.

Replace the star-shape washer with a new one if it is worn down.

6-8. Process control PWB (Clean the sensor

section every 60K copies.)

1 Remove the holder from the process unit (3 blue screws), and

remove the connector of the process control PWB.

2 Remove the holder of the process control PWB (2 screws), and

remove the PWB (2 screws).

6-9. Drum mark sensor PWB (Clean the sensor

section every 60K copies.)

Remove the holder from the process unit (3 blue screws), and

remove the marking sensor PWB. (1 screw).

6-10. Toner reception seal (Replace every 60K

copies.)

Remove the drum and remove two screws to remove the seal.

6 – 19

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 124 125

Sem comentários

Sharp SF-1116 Manual de Serviço Página 59