Sharp AR-810 Manual do Utilizador descarregar pdf (Página 59)

5 - 59 AR-651/810 TROUBLE SHOOTING

[CD4] Toner bag full

(1) Check the toner bag.

•Is the toner bag full?

(2) Check the toner full detection sensor.

•Is the tone full detection sensor working properly?

•Is the connector not disconnected?

(3) Check the used toner transport motor.

•Is the used toner transport motor driving?

•Does the pulley beside the motor become heavy when it is turned toward the direction of arrow

(counterclockwise)?

(4) Replace the LGC board.

(5) Release the status counter.

•Turn the power ON while pressing both the [0] and [8] keys.

•Press the [START] key after inputting [399] with digital keys.

•Change the status counter "1", "2" or "3" to "0" and press the [SET] or [INTERRUPT] key ([CD4]

released).

•Check if the copier becomes to a standby state normally when power is turned ON again.

•In case that the used toner transport motor does not drive or [CD4] is not released when power is

turned ON again, do the above procedure after manually turning the pulley beside the motor

toward the direction of arrow (counterclockwise) several times.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 100 101

Sem comentários

Sharp AR-810 Manual do Utilizador Página 59