Sharp AR-810 Manual do Utilizador descarregar pdf (Página 28)

AR-651/810 TROUBLE SHOOTING 5 - 28

[E55] Paper remaining on the transport path when CRUN is OFF

Open the cover of the unit/area whose picture is flashing on the control panel. Is there any paper on

the transport path?

YES

Remove the paper.

Is the sensor in the jamming area working?

(Perform the input check in the test mode: refer to the following table)

1. Check if the connector of the sensor is disconnected.

2. Check if any of the connectors on the LGC board is disconnected.

3. Check if the connector pins are disconnected and the harnesses are open-circuited.

4. Check if the conductor pattern on the LGC board is shor t- or open-circuited.

5. Replace the sensor.

6. Replace the LGC board.

YES

Replace the LGC board.

Relation between the jamming area and the corresponding sensors

Jamming area Sensor Test mode/Input check

Registration area Registration sensor 03-[ENERGY SAVER]ON/[4][E]

Exit/Reverse area Exit sensor 03-[ENERGY SAVER]OFF/[6][G]

Reversel sensor 1 03-[ENERGY SAVER]OFF/[6][C]

Reversel sensor 2 03-[ENERGY SAVER]OFF/[6][B]

Reverse transport Transport sensor 1 03-[ENERGY SAVER]OFF/[0][C]

area Transport sensor 2 03-[ENERGY SAVER]OFF/[0][A]

Tr a n s p o r t s e n s o r 3 0 3 - [ E N E R G Y S AV E R ] O F F / [ 0 ] [ B ]

Paper feeding 1st cassette feed sensor 03-[ENERGY SAVER]OFF/[2][A]

area 2nd cassette feed sensor 03-[ENERGY SAVER]OFF/[3][A]

3rd cassette/Tandem LCF feed sensor

03-[ENERGY SAVER]OFF/[4][A]

4th cassette/Tandem LCF feed sensor

03-[ENERGY SAVER]OFF/[5][A]

1st cassette transport sensor 03-[ENERGY SAVER]OFF/[2][B]

2nd cassette transport sensor 03-[ENERGY SAVER]OFF/[3][B]

3rd cassette/Tandem LCF transport 03-[ENERGY SAVER]OFF/[4][B]

sensor

4th cassette/Tandem LCF transport 03-[ENERGY SAVER]OFF/[5][B]

sensor

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 100 101

Sem comentários

Sharp AR-810 Manual do Utilizador Página 28