Sharp AH-X10BE Manual do Utilizador descarregar pdf (Página 8)

OPTION 2: Filled Wood Frame

O2.5: Once all boards are level and do not wobble,

pack “Pea” gravel or dirt around the outside of the

frame, and slope away from frame.

O2.7: Now ﬁ ll the inside of the frame with “Pea” gravel.

Use a leveling board to scrape off extra ﬁ ll material and

to level the surface.

118 1/4”

93 1/2”

Item Qty.

2” x 6” x 86 1/2” treated board* 2

2” x 4” x 118 1/4” treated board* 2

8d 1 1/2” common nails 16

1” ‘L’ bracket 4

“Pea” gravel 9.8 cu. ft. (approx.)

Leveling board (2” x 4” x 10’) 1

* Must be rated for outdoor use.

O2.2: Nail an L-bracket on each corner

of the frame with 8d nails.

O2.1: Be sure you use lumber that is treated and approved for outdoor

use. Cut outside frame to 93 1/2” x 118 1/4” outside dimensions:

O2.3: Square up the frame by measuring

from corner to corner. Measurement A

should equal Measurement B.

O2.6: Use

approximately

9.8 cu. ft. of

“pea” gravel.

Note: Ensure frame is ﬂ at with widest

ends facing up. Ensure frame is level.

O2.4: Place platform in the desired location. If platform does not rest level on the ground, build up low points with loose

dirt or “Pea” gravel, until platform is stable.

14.15: Install Next Roof Panel.

SS (11)

14.16: Install last Roof Panel.

SS (11)

Hardware Bags:

1001632

Screwdriver

Hardware Bags:

1001632

Screwdriver

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Sem comentários

Sharp AH-X10BE Manual do Utilizador Página 8