Sharp AH-X10BE Manual do Utilizador descarregar pdf (Página 17)

Second person should apply

pressure on opposite side of

the wall for easy insertion of

screws.

12.1: Assemble the two halves of the Rear Gable.

12.2: Install the Louvered Vent (VA) and the Vent Screen (VB) onto

the assembled Rear Gable, and set it aside until later.

Rear Gable Assembly

A second person should apply

pressure on the opposite side of the

gable for easy insertion of the screws.

Hardware Bags:

HH11900

Screwdriver

PB (5)

VC (5)

Screwdriver

SS (4)

Hardware Bags:

1003173

Hardware Bags:

1020803

3/8” Wrench (1)

Drill/Screwdriver

GC (1)

GA (6)

12.3: Insert End Plugs (GB) into the ends of the Rear Wall Roof

Support (AL). Attach the Rear Wall Roof Support to the assembled

Rear Gable, and secure it with six 1/4” x 1.125” Pan-Head Screws

(GA) and one #10 x 1 1/4” Pan-Head Screw.

Round Hole

Front Gable Assembly

10.1: Insert End Plugs (GB) into ends of Gable Support Square Tube (AH).

Attach Gable Support Square Tube to Front Gable (111), and secure with

Screws (GA).

10.2: Install Vent (VA) and Screen (VB) into the Front Gable, using Screws

(PB) and Washers (VC).

Hardware Bags:

HH11900

Screwdriver

PB (5)

VC (5)

Second person should apply

pressure on opposite side of the

wall for easy insertion of screws.

The Square Tube must be

oriented with the ﬂ at rectangle

hole up, and the ﬂ at oval holes

facing away from the gable.

aci

Only use a hand screwdriver on

this step

Hardware Bags:

1020803

Screwdriver

GA (6)

9.7: Line up the hole in the Latch Block (XX) with the hole in the

Thumb Lever (HG) and Screw (PB) into place.

Note: The Spring is not shown in this illustration in order to

better show the correct placement of the Latch Block.

Note: The lip of the Latch Block (XX) ﬁ ts under the Thumb Lever

(HG).

Square Hole

1 2 ... 12 13 14 15 16 17 18 19 20

Comentários a estes Manuais

Sem comentários

Sharp AH-X10BE Manual do Utilizador Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Aparelhos de ar condicionado "split system" Sharp AH-X10BE