Sharp DP-750 Manual do Utilizador descarregar pdf (Página 31)

DP750 User's Manual

- 27 -

decrease.

4.5 Tear-off Adjustment Mode

There is a tear-off bar at the edge of the window cover. When you have finished printing, you can

advance the tractor paper on the tracker to the tear-off bar by the tear-off function to easily tear off the

perforated sheets. The tear off setting determines the distance between the perforation of tractor

paper and the tear-off bar. If the default distance is not suitable for you, you can adjust it by the

printer’s tear-off adjustment feature.

With the printer online, press both the COPY/LOAD/EJECT and LF/FF keys for about 3 seconds to

get the printer to enter the tear-off adjustment mode. When the printer enters this mode, the ONLINE

LED and the POWER LED blink alternately.

Use the COPY/LOAD/EJECT and LF/FF keys to alter the tear-off setting:

COPY/LOAD/EJECT: Press the COPY/LOAD/EJECT key to adjust the distance in 1/60 inch

increments. You can maximum increase to +15/60 inch.

LF/FF: Press the LF/FF key to adjust the distance in 1/60 inch decrements. You can maximum

decrease to -15/60 inch.

To exit and save your new setting, press ONLINE key. The PAPER OUT LED and the ONLINE LED

blink simultaneously for 2 times and beep twice, then the PAPER OUT LED and ONLINE LED turn on.

Your new tear-off setting value is saved.

4.6 Using the Setup Menu System

The factory settings of this printer are selected to meet the requirements of the majority of users.

However, you may want to use a different character set for a different language or you may prefer

printing in different font or style. To achieve this, you can use the Setup Menu System to create your

own printer settings by modifying or changing the factory defaults.

The setup menu system is divided into several groups, and each group contains a number of menu

lists, each list containing several settings. You can select a new setting of the menu list and save it, or

just go to the next menu list without altering the current setting.

4.6.1 Printing the Current Setting Report

You can use the information in the current report to decide which settings you want to change.

To print the current settings:

1. Turn the printer off.

2. If you use tractor paper, make sure the tractor paper has been fixed properly. (The width of tractor

paper at lease 240 mm)

3. Hold down both the COPY/LOAD/EJECT and LF/FF keys.

4. Turn the printer on.

The printer automatically loads paper and prints the current settings. An example print out is shown in

Figure 4-2.

Caution: 1. The options whose color is printed contrarily are the current settings. If the initialization

of “Language” is “English”, saving the setting and operating the upper steps again, and

it will print the current settings in English. The way of changing the settings is in the

NOTE

To exit without saving, just turn the printer OFF.

NOTE

To exit without saving, just turn off the printer.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 52 53

Comentários a estes Manuais

Sem comentários

Sharp DP-750 Manual do Utilizador Página 31

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Sharp DP-750