Sharp R-652M Instruções de Operação descarregar pdf (Página 46)

42 YP4-6-825A3P Table of Contents Index Great Plains Manufacturing, Inc.

401-652M Table of Contents Index 2015-01-26

Marker Adjustments (Option)

See also:

•“Initial Marker Setup (Option)” on page 114 for

marker speed and marker extension

•“Marker Operation (Option) S/N-” on page 33; and,

•“Marker Maintenance (Option)” on page 82 for

marker shear bolt and marker hydraulic bleeding

Marker Disk Adjustment

Sharp Object Hazard:

Use caution when making adjustments in this area.

Marker disks may be sharp.

Refer to Figure 33

1. To change angle of cut, and the width of the mark,

loosen

⁄

inch bolts holding the disk assembly.

For a wider mark , increase the angle of the

marker with respect to the tube . For a narrower

mark , reduce the angle.

Note: Do not set a marker angle wider than needed to

make a useful mark. Excess angle increases wear

on all marker components.

2. Tighten bolts .

Note: Direction of travel tends to drive the disk angle to

Wide. If bolts are not tight enough, or loosen over

time, disk slips into the Wide mark conﬁguration.

Refer to Figure 34

Applies to planters with serial numbers:

(YP3P425A s/n B1005M+)

(YP3P625A s/n B1007P+) (YP3P825A s/n B1008R+)

Current markers are equipped with an additional marker

disk adjust mount which gives the marker added

capability of up/down direction of movement where

previously it only performed side to side movement.

Additionally, the markers are able to make a wider mark

in the ﬁeld.

Sharp Overhead Object and Pinch/Crush Hazards:

Never allow anyone near the planter when folding or

unfolding the markers. Markers may fall quickly and

unexpectedly if the hydraulics fail. Anyone beneath may be

injured if hit by an unfolding marker, or caught in a folding

marker.

Figure 33

Marker Disk Angle

11757

Figure 34

Marker Disk Angle (S/N+)

31974

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 127 128

Comentários a estes Manuais

Sem comentários

Sharp R-652M Instruções de Operação Página 46

Comentários a estes Manuais

Manuais e produtos relacionados com Micro-ondas Sharp R-652M