Sharp R-652M Instruções de Operação descarregar pdf (Página 28)

24 YP4-6-825A3P Table of Contents Index Great Plains Manufacturing, Inc.

401-652M Table of Contents Index 2015-01-26

Loading Materials

Hopper Operations (s/n B1013R-)

Refer to Figure 15 and Figure 16

Hopper lids have distinct ends:

• the hinge end (with two lugs) mates with the front

end of the hopper.

• the latch end (with a single lug) mates with the rear

end of the hopper.

To open a hopper:

1. Pull the rear of the lid edge to the rear.

2. Swing the lid up at rear.

3. Disengage the lid at the front lugs.

4. Park the lid on the front lip of the hopper, using the

hook-plate feature inside the lid (see Figure 17 on

page 25).

The seed hoppers themselves are designed to be

removed, but are not removed for routine operations.

Loading Seed (1 bu.hoppers)

5. Install correct seed disks (page 57).

6. Close all seed inlet shutters (page 58).

7. Check that each hopper is correctly seated and

secured:

pivot hooks engage at front,

latch engaged at rear,

seed hose secured to

discharge weldment with

clamp.

8. The hopper slide gate may be left open (by pulling

back), and doing so slightly increases seed capacity.

Note: If slide gate is open for seed loading, seed inlet

shutters must be closed unless the planter is

already at the ﬁeld. Transporting with both gates

and shutters open can plug meters.

9. Open hopper lid .

10. Inspect the hopper for leftover seed and debris.

Clean out anything other than the seed to be

planted. See “Material Clean-Out” on page 75.

Figure 15

Hopper Lid Hinge Lugs

28131

Figure 16

Air-Pro

Row Hopper

(serial number B1013R-)

29975

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 127 128

Comentários a estes Manuais

Sem comentários

Sharp R-652M Instruções de Operação Página 28

Comentários a estes Manuais

Manuais e produtos relacionados com Micro-ondas Sharp R-652M