Sharp 32L-X2000 Manual de Instruções descarregar pdf (Página 13)

g) Inspect the rollers to ensure they roll freely

and are not damaged. (Figure 331).

11) Inspect the carryimg handle for damage and

{Code #40335 Pos. 34} shown in Figure 332.

3-7 Reassembly

1) Re-grease the pressure system {Code

#23257, Pos. 80} with wheel bearing or white

lithium grease.

2) Reinstall the lower guide plate {Code

#40405, Pos. 48, Figure 322}, wire rope

guiding device {Code #63705, Pos. 47,

Figure 321} and upper guide plate {Code

#63715, Pos. 46, Figure 312}.

3) Reinstall the wire rope entrance tube

{Code #40365, Pos. 49} and snap ring {Code

#6846, Pos.57} in Figure 320. Place the

snap ring onto the entrance tube rotate it so

the tabs are up. This extra bit of clearance

eases installation of the casing cover.

4) Reinstall the exit tube {Code #63725, Pos.

41, Figure 311}. Ensure the tube is not

blocked.

5) Reinstall the stirrup anchor bar {Code

#47867, Pos. 86, Figure 310}.

3-8 Casing Cover Installation

1) Using a hammer and dowel punch, gently tap

the roll pins (clamping sleeves) flush into the

casing cover (#63695, Pos. 2, Figure 333).

13

WARNING

DO NOT use molybdenum disulphide (moly-b)

grease or graphite type grease!

Figure 333

Figure 331

NOTE

The regular service inspection is now com-

plete. Clean all components with mineral spir-

its and dry thoroughly.

Figure 332

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 76 77

Comentários a estes Manuais

Sem comentários