Sharp 32L-X2000 Manual de Instruções descarregar pdf (Página 10)

3-6 Internal Inspection

1) Remove and inspect the stirrup

adapter{Code #47867, Pos. 86} in Figure

310. Ensure it is straight and the anchor pin

is secure.

2) Remove and inspect the exit tube {Code

#63725, Pos. 41} shown in Figure 311.

Ensure it's free of debris inside. Replace as

needed.

3) Remove the two socket head cap

screws {Code #8926, Pos. 53} and two

locking washers {Code #16616, Pos. 32} in

Figure 312 & 313.

4) Inspect the upper wire rope guiding plate

{Code #63715, Pos. 46} and compare it to

Figures 314 and 315.

Figure 315 shows how the guiding plate should

look like. Figure 314 shows a bent or damaged

wire rope guiding plate which must be replaced.

10

Figure 310

Figure 311

Figure 314

NOTE

IF the plate shows damage, this indicates a

wire rope jam has occurred and the pressure

system must be carefully inspected.

Figure 312

Figure 313

Figure 315

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 76 77

Comentários a estes Manuais

Sem comentários