Sharp AR-4551 Especificações descarregar pdf (Página 92)

5-24

SADDLE STITCH FINISHER

Misfeed in the saddle stitch finisher

If a misfeed has occurred in the saddle stitch finisher during printing, remove the misfed paper following the procedure

below.

Pull the knob and slide the saddle stitch

finisher away from the main unit.

Remove the misfed paper from the main

unit.

If misfed paper is not found in step 1, open

the top cover.

Turn roller rotating knob B until the triangle

mark reaches the position indicated in the

illustration (only if a punch module is

installed as a peripheral unit).

Remove the misfed paper.

Be careful not to tear the

misfed paper during

removal.

Close the top cover.

Open the front cover.

Turn roller rotating knob C until a blue

indication is seen (when the stapling

function has been used).

Remove the misfed paper from the stapler

compiler (when the stapling function has

been used).

Be careful not to tear the

misfed paper during

removal.

Open the saddle stitch section cover (when

the saddle stitch function has been used).

Roller rotating

knob B

Blue

Roller rotating

knob B

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 279 280

Sem comentários

Sharp AR-4551 Especificações Página 92