Sharp FO-2080 Especificações descarregar pdf (Página 98)

4. FAX simulations

A. Entering the FAX simulation mode

There are following two ways of entering the Fax simulation mode. They differ only in the key sequence and the operations of the simulation are

the same in either mode.

For key operations in the FAX simulation mode, use the LCD display and the FAX panel.

During Fax operations, the Fax simulation cannot be entered.

(1) From the FAX panel

Procedure Procedure Position Operation

1 Press FUNCTION, 9, ∗, 8, #, 7. Fax Panel ROM version is displayed on the LCD.

2 Press ENTER. Fax Panel FAX enters the simulation mode.

The machine is in the normal display.

3 Press ← / → proper times. Fax Panel Each mode name is displayed on the LCD sequentially.

4 Press ENTER. Fax Panel The mode is determined.

5 Procedure in each mode Fax Panel Operations in each mode

Instead of above procedures 3 and 4, press the code (2 digits) of the target mode to enter the mode directly.

(2) From the COPIER panel

Procedure Procedure Position Operation

1 Press Clear, Exposure, Clear,

Exposure.

Copier Panel Waiting for simulation code.

FAX is in the normal display.

2 Enter the main code of 66 with

10Up/1Up keys.

Copier Panel “66” is displayed on 7SEG LED.

3 Press START key. Copier Panel The machine exits the simulation mode, and the FAX enters the

simulation mode.

4 Press ← / → proper times. Fax Panel Each mode name is displayed on the LCD sequentially.

5 Press ENTER. Fax Panel The mode is determined.

6 Procedure in each mode Fax Panel Operations in each mode

Instead of above procedures 4 and 5, press the code number (2 digits) of the target mode to enter the mode directly.

B. List of functions

Mode

Mode Details of functions

LCD display

(Mode name)

01 Soft switch setting

mode

This mode is used to change the soft switch setup. The available soft switches

are SW1 to SW30. The contents of soft switches are backed up.

For details of soft switches, refer to “Software Switch for FAX.”

01:SOFT SWITCH

02 Soft switch clear

mode (Only the

setup is cleared.)

This mode is used to reset the soft switch setup (including the user option setup)

to the default.

Since, however, some of soft switches have the adjustment values, the area for

the adjustment values is excluded from the targets.

02:SOFT SW CLEAR

03 ROM & RAM

check mode

This mode is used to perform ROM check sum and RAM read/write test.

The result is shown with the buzzer and the LCD.

No error: NO ERROR/ No buzzer

ROM error : ROM ERROR / Buzzer once

RAM error : RAM ERROR / Buzzer twice

03:ROM/RAM CHECK

04 Signal send mode This mode is used to send various signals to the line. The FAX signal is sent in

the level set with the soft switch.

There are the following kinds of signals:

04:SIGNAL SEND

1 No signal ( OFF HOOK state)

2 DTMF (0,1,2,3,4,5,6,7,8,9,∗,#)

3 14400 bps (V.17) (00000000b, 11111111b, 01010101b)

4 12000 bps (V.17) (00000000b, 11111111b, 01010101b)

5 9600 bps (V.17) (00000000b, 11111111b, 01010101b)

6 7200 bps (V.17) (00000000b, 11111111b, 01010101b)

7 9600 bps (V.29) (00000000b, 11111111b, 01010101b)

8 7200 bps (V.29) (00000000b, 11111111b, 01010101b)

9 4800 bps (V27ter) (00000000b, 11111111b, 01010101b)

10 2400 bps (V27ter) (00000000b, 11111111b, 01010101b)

11 300 bps (FLAG) (00000000b, 11111111b, 01010101b)

12 2100 Hz (CED)

13 1100 Hz (CNG)

FO-3800M

8 – 16

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 179 180

Comentários a estes Manuais

Sem comentários

Sharp FO-2080 Especificações Página 98

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Sharp FO-2080