Sharp FO-2080 Especificações descarregar pdf (Página 57)

[6] MACHINE OPERATION

(1) Operation mode

This machine has the following operation modes.

Mode Content

Copy mode During the coy mode, print data is received but not accepted. After completion of copying, print is

automatically performed.

Print mode Laser image data from the host is printed.

Power save mode There are the pre-heat mode and the power shut down mode. In the pre-heat mode, fusing temperature is

lowered. In the power shut down mode, all the sections excluding the control circuit are stopped.

Test command (Simulation) This mode is used for servicing (various setting, adjustments, and checking of the operations).

User program mode Used to set the operating specifications according to user’s need.

Fax mode FAX transmission/reception mode. Image data scanned by the scanner are transmitted. / Image data

received from the other party is printed.

Scanner mode Image data scanned by the scanner is sent to the host (PC).

(2) Machine status and display

There are following machine status, and the operation and display are made for each status.

Machine status

Machine condition

READY

LAMP

LINE

LAMP

3 GREEN

SEGMENT

LED

PRE-

HEAT

LAMP

JAM

LAMP

TONER

CERTRIDGE

REPLACE-

MENT LAMP

DRUM

CERTRIDGE

REPLACE-

MENT LAMP

Copy

lamp

NOTE

Warm up

Warming up and initializing

are performed in the fusing

section, the image process

section, the scanner

section, and the electrical

circuits.

OFF — — — — — — ON

READY

ONLINE

Print image is received and

printing is allowed.

ON ON — — OFF OFF OFF ON

Press the clear key twice to

enter the online mode.

OFFLINE

Only copying is allowed.

(Printing is inhibited.)

ON OFF — — OFF OFF OFF ON

BUSY

Copying OFF OFF

— — — — — ON Interruption inhibited.

Printing ON BLINK

Power

save

Pre-heat

mode

The fusing temperature is

lowered to reduce power

consumption.

ON ON — ON — — — OFF

When any key is pressed,

warming up is started.

Power

shut

down

mode

Conduction to the loads

other than electrical circuits

is inhibited, excluding the

heater lamp and the copy

lamp.

OFF ON OFF ON OFF OFF OFF OFF

All lamps except for

READY indicator are turned

OFF. When any key is

pressed, warming up is

started.

Machine

trouble

The machine operation

cannot continue operation,

and copying or printing is

forcibly stopped.

(Conduction is stopped

excluding the display

section.) The error code is

displayed and the error

lamp is lighted.

OFF OFF

The error

code is

displayed.

— — — — OFF

Requires repair work by a

serviceman.

Paper jam OFF OFF — ON BLINK — — OFF

Mis-feed

Paper is not fed in the

paper feed section.

OFF OFF

P-

BLINKING

— OFF — — —

The 3 green 7 segment

LED displays blink "P."

Consumable part

empty

Photoconductor cartridge

life (20K) over

OFF OFF — — — — BLINK OFF

When the life is reached

during copying or printing,

the job is completed then

the machine is stopped.

Photoconductor cartridge

life (19K) near

ON ON — — — — ON —

Toner empty (Near end) ON ON — — — BLINK(ON) — —

The machine operation is

not stopped.

Paper empty OFF OFF

P-

BLINKING

—— — — —

The input tray indicator

blinks, 3 green 7 segment

LED displays blink "P."

FO-3800M

6 – 1

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 179 180

Comentários a estes Manuais

Sem comentários

Sharp FO-2080 Especificações Página 57

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Sharp FO-2080