Sharp FO-2080 Especificações descarregar pdf (Página 86)

Code

Function (Purpose) Purpose Section Item

Main Sub

24 10 Use to clear the FAX transmission/reception counter.

(FAX model only)

Data clear FAX Counter Communication

13 Used to clear the frequency of use (scanning) of the

scanner (reading).

Data clear Optical (Image

scanning)

Counter

14 Used to clear the SPF mis-feed (jam) counter. (FAX

model only)

Data clear ADF/RADF/UDH/SPF Counter

25 1 Used to check the operations of the main drive section

(excluding the scanner (reading) section).

Operation test/check DRIVE Operation

10 Used to check the operations of the scanner (writing)

motor and the control circuit.

Operation test/check Laser (Exposure) Operation

26 2 Used to set Enable/Disable of the SPF and the FAX

functions. (When a trouble occurs in the SPF and the

FAX section, disable those functions to allow only

copying and scanning functions.

Setting ADF/RADF/UDH/SPF Specifications

6 Used to set the specifications depending on destination. Setting Specifications Destination

7 Used to set the model (hardware) specifications. Setting PCU Specifications Operation mode

(Common)

20 Used to set the rear edge void area YES/NO

(specification).

Setting Specifications Operation mode

(Common)

30 Used to set the operation mode conforming to the CE

mark. (For flickers when driving the fusing heater lamp.)

Setting Fixing (Fusing) Specifications Operation mode

(Common)

38 Used to set Enable/Disable of the operation when the

OPC drum life is reached.

Setting Specifications Operation mode

(Common)

40 Used to set the scanner (writing) motor OFF timing. Setting Laser (Exposure) Specifications Operation mode

(Common)

44 Used to adjust the rear edge void area in the SPF

copy mode. (AL/FO Series only)

Adjustment ADF/RADF/UDH/SPF Operation Copier

47 Used to adjust the rear edge void area adjustment in

the FAX mode.

Adjustment ADF/RADF/UDH/SPF Operation FAX

30 1 Used to check the sensors and detectors in the paper

feed/paper transport/paper exit sections, and their

related circuits.

Operation test/check Paper transport

(Discharge/Switchback/

Transport)

Operation

43 1 Used to set the fusing temperature. Setting Fixing (Fusing) Operation

4 Used to set the fusing temperature for 20th sheet or

later in multi print operation.

Setting Fixing (Fusing) Operation

46 1 Used to adjust the copy density. (The overall print

density (including all the specified density gradients)

of each mode can be adjusted.)

Adjustment Picture quality Density

12 Used to adjust the print density in all the FAX modes.

(Used to adjust all the print densities in all the FAX

modes collectively.)