Sharp AR-168S Manual de Serviço descarregar pdf (Página 94)

AR-168S/168D TEST COMMAND, TROUBLE CODES 10 - 14

26 30 CE mark support control ON/

OFF (CE MARK)

[Function]

When this test command is executed, the current set CE mark support control is displayed. Enter the

code number corresponding to the desired CE mark support control and press [ENTER/START] key

to save the setting.

[Operation]

The operation is similar to test command 21-01.

37 Cancel of stop at developer

life over (DVLP LIFE END)

[Function]

When this test command is executed, the current setting is displayed. Enter the code number corre-

sponding to the desired setting and press [ENTER/START] key to save the setting.

[Operation]

The operation is similar to test command 21-01.

39 Memory capacity check

(MEM.CHK)

[Function]

When the test command is executed, the currently installed SDRAM of the main unit is displayed.

[Operation]

40 Polygon motor OFF time

setting (Time required from

completion of printing to

turning OFF the motor) (LSU

MOTOR OFF)

[Function]

When this test command is executed, the current setting is displayed. Enter the code number corre-

sponding to the desired setting and press [ENTER/START] key to save the setting.

[Operation]

The operation is similar to test command 21-01.

42 Transfer ON timing control

setting (TC ON TIMING)

[Function]

When this test command is executed, the currently set value of the transfer ON timing is displayed

(initial display), and the set value is saved. (Setting range: 0 – 9, Default: 5)

∗

The default “5” of transfer ON timing is “330ms passed from PS release.”

∗

When set to “0,” it is the same as setting to “5.”

[Operation]

The operation is similar to test command 21-01.

Main

code

Sub

code

Contents Details of function/operation

Code number Setting Display item Remark

0 CE mark support control OFF OFF Default (100V series)

1 CE mark support control ON ON

Code number Setting Display item Remark

0 Stop at developer life over STOP

1 Cancel of stop at developer life over NONSTOP

Code number Setting Remark

88 MBYTE

1) Memory capacity display

26-39 MEM.CHK

8 MBYTE

Code number Setting Display item Remark

00sec0 SEC.

1 30sec 30 SEC. Default

2 60sec 60 SEC.

3 90sec 90 SEC.

Code Setting Remark

00 msec

1 –40 msec

2 –30 msec

3 –20 msec

4 –10 msec

5 0 msec Default

6 +10 msec

7 +20 msec

8 +30 msec

9 +40 msec

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 183 184

Comentários a estes Manuais

Sem comentários

Sharp AR-168S Manual de Serviço Página 94

Comentários a estes Manuais

Manuais e produtos relacionados com Impressora multifunções Sharp AR-168S