Sharp AR-168S Manual de Serviço descarregar pdf (Página 53)

AR-168S/168D DISASSEMBLY AND ASSEMBLY 8 - 10

5) Disconnect the connector from the MCU PWB.

6) Disengage the pawls (2 positions), and remove the sensor PWB.

7) Remove the screw, and open the upper paper guide.

8) Remove the roller, and remove the belt.

9) Disengage the pawl, and remove the roller knob.

10) Disengage the pawl, and shift the pulley and the bearing.

11) Remove the paper exit roller, and remove the belt, the pulley, and

the bearing.

12) Remove the connector and the screw, and remove the speaker

unit. (When the AR-FX9 is installed)

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 183 184

Sem comentários

Sharp AR-168S Manual de Serviço Página 53