Sharp PC-9800T Especificações descarregar pdf (Página 42)

Special installation (Wall embedding (vertically wall-embedding equipment))

3.4.6 Wall embedding (vertically wall-embedding equipment)

This display is designed to accommodate embedding in a wall. Since the allowable range of outside-air temperature

depends on the installation conditions. Please observe the following conditions:

1 Use a metal mounting fixture that does not block the side slits or the back ventilation holes, and attach at a

minimum of four points. To avoid breaking the PDP panel, limit any twisting or bending stress applied to the

display to 1 mm or less.

Do not use cable clamps for this installation method. Cable clamps can interfere with proper ventilation and

result in device failure.

3 Installation conditions and ambient operating temperatures:

(1) If the space behind the wall is open (If there is no obstruction within 300 mm from the backside):

Install the display with

the fan on top.

100

Exhaust

* The same conditions apply to the working temperature requirements for a speaker system (PDP-S03-LR).

* When mounting the down converter (PDA-4003), the same working temperature conditions apply.

Working temperature requirements

100 mm

PC-9800 (56.4Hz)

PC-9800 (70.1Hz)

A size VIDEO Machintosh (66.7Hz)

VGA (60Hz)

VGA (72.8Hz, 75Hz)

60 mm or less 0~40°C 0~40°C 0~40°C

60 mm or more and/or 150 mm or less 0~40°C 0~40°C 0~35°C

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 184 185

Sem comentários

Sharp PC-9800T Especificações Página 42