Sharp PC-9800T Especificações descarregar pdf (Página 30)

3.4.3 Wall embedding

This display is designed to accommodate embedding in a wall. Note that the allowable range of outside-air temperature

depends on the installation conditions. Please observe the following requirements:

1 Use a metal mounting fixture that does not block the side slits or the back ventilation holes, and attach at a

minimum of four points. To avoid breaking the PDP panel, limit any twisting or bending stress applied to the

display to 1 mm or less.

2 Do not use cable clamps for this installation method. Cable clamps can interfere with proper ventilation and

result in device failure.

3 Installation conditions and ambient operating temperatures:

(1) If the back of the display will be unobstructed (If there is no obstruction within 300 mm from the backside):

Intake

MAX 20 mm

Exhaust

100 mm100 mm

Special installations (Wall embedding)

* The same conditions apply to the working temperature requirements for a speaker system (PDP-S03-LR).

* When mounting the down converter (PDA-4003), the same working temperature conditions apply.

PC-9800 (56.4Hz)

PC-9800 (70.1Hz)

A size VIDEO Machintosh (66.7Hz)

VGA (60Hz)

VGA (72.8Hz, 75Hz)

150 mm or more 0~40°C 0~40°C 0~40°C

100 mm

X-Y space temperature requirements

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 184 185

Sem comentários

Sharp PC-9800T Especificações Página 30