Sharp LL-T2000 Manual de Serviço descarregar pdf (Página 39)

Revision D

3-11

Maintenance

: Belt Tracking Adjustments

Series 2000 Treadmill

409110-004

Belt Tracking Adjustments

When to Adjust

The treadmill walking-belt tension is set at the factory. However, you

should test the belt tracking every time the treadmill is moved. Run the

treadmill for several minutes with no one exercising. If the belt tracks to

one side or the other, then you must adjust the belt tracking.

It is not unusual for the treadmill belt to move slightly off center while a

person with a heavy gait is exercising. A properly adjusted belt recenters

itself when the person steps off the treadmill. If the belt does not

recenter, check the treadmill level and adjust the belt tracking as

described.

Check Treadmill Level

1. Use the controlling equipment to set the treadmill elevation to

0.0%.

2. Check the treadmill level with a carpenter’s level.

3. If the treadmill is uneven, adjust the feet at the rear of the

treadmill until it is stable.

For stability, use one shim of the right thickness (rather than

several thin shims) to achieve the proper level.

If necessary, use longer shims to accommodate the maximum

treadmill elevation. The treadmill wheels must not roll off the

shims. Verify that the shim lengths exceed the wheel movement

when the treadmill is fully elevated.

4. If you cannot level the treadmill safely with shims, move the

treadmill to another location.

WARNING

Keep hands, hair,

jewelry, and loose

clothing away from

moving parts.

M15287-26B

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 151 152

Sem comentários

Sharp LL-T2000 Manual de Serviço Página 39