Sharp 21F-A30 Manual do Operador descarregar pdf (Página 75)

OPERATION

Form 169000 / 169040 73 Revision C

6.17.4.3 Auger Fore-Aft Adjustment: A30-D

CAUTION

To prevent accidental movement of

windrower, place all controls in NEUTRAL or

in PARK, engage park brake (if applicable),

shut off engine, and remove key.

a. Open LH endshield.

b. Loosen auger drive chain (A) as follows:

1. Loosen nut (B) on idler sprocket support.

2. Turn adjuster bolt (C) to loosen chain (A).

c. Loosen four nuts (D).

d. Loosen jam-nut on adjuster bolt (E), and turn

adjuster bolt (E) to adjust auger fore-aft position.

e. Tighten jam-nut and four nuts (D).

f. Tighten auger drive chain (A) as follows:

1. Turn adjuster bolt (C) to achieve ¼ in.

(6 mm) slack at mid-span of chain (A).

2. Tighten nut (B) on idler sprocket support.

3. Rotate auger and check chain for slack at

tightest point. Re-adjust position of idler

sprocket to achieve required slack.

g. Open RH endshield.

h. Loosen reel drive belts (F) as follows:

1. Loosen nuts (G).

2. Loosen jam-nut on adjuster bolt (H), and

turn adjuster bolt (H) to loosen reel drive

belts.

i. Loosen nuts (J).

j. Loosen jam-nut on adjuster bolt (K), and turn

adjuster bolt (K) to adjust auger fore-aft position.

k. Tighten nuts (J) and jam-nut.

(continued next page)

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 191 192

Sem comentários

Sharp 21F-A30 Manual do Operador Página 75