Sharp YO-370 Manual descarregar pdf (Página 93)

FTS 370d/w/r Revision 10 – 1/09/2015 81

Component Removal and

Replacement

Note the location and color of all wires

that you disconnect when troubleshooting

or replacing components. Verify that the

wiring agrees with the applicable figure in

Section 2 after testing or replacing any

component.

Important! Review the Safety

information at the beginning of

Section 5 before removing or

replacing any component.

The general procedures for removing

components with power disconnected are

as follows:

1. Obtain access to the component in

question.

2. Completely remove or relocate these

components.

3. Disconnect the wiring to the

component that you want to replace.

4. Remove the component.

5. Replace everything in the reverse

order: first the component, then the

wiring. In some cases, you may have

to place some wires on the component

before you fasten it in place, then

replace the remaining wires.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 117 118

Sem comentários

Sharp YO-370 Manual Página 93