Sharp AR-M205 Manual do Utilizador descarregar pdf (Página 69)

TROUBLESHOOTING

C. Misfeed in the transport area

Open the fusing paper guide by

pressing down the projection on

either side of the guide and remove

the misfed paper.

Be careful not to tear the

misfed paper during

removal.

If the misfed paper cannot be removed

by the previous step but is visible in

the paper output area, remove the

paper by pulling it into the paper

output area.

Be careful not to tear the

misfed paper during

removal.

Close the side cover.

The misfeed indicator

( ) will go out.

The fusing unit is hot. Do not touch

the fusing unit when removing misfed

paper. Doing so may cause a burn or

injury.

• When closing the side cover, press on the

handle.

• If the paper was torn, make sure that no

torn pieces remain in the machine.

• If the misfeed indicator ( ) does not stop

blinking, check for torn pieces of paper in

the machine.

Warning

Note

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 95 96

Sem comentários

Sharp AR-M205 Manual do Utilizador Página 69