Sharp R-310J Manual do Operador descarregar pdf (Página 22)

Page 22

GENERAL MAINTENANCE

Drive rolls:

The drive rolls must be kept clean. Wash with lacquer thinner or other

recommended solvents to remove gum buildup or small bits of labels adhering to

rollers. Never use razor blade or sharp instruments on rollers. Damaged or

gummy rollers will cause inconsistencies in label application. If they are

damaged, replace them. Part Number “SRL-500-33-A”, both rollers are the

same.

Lubrication:

The only part in the applier that requires lubrication are the 2 main shafts (drive

and rewind) that rotate in bushings. These bushings should be oiled once every

2 or 3 years. Remove cover to oil internal bushings as shown below in Fig 17b.

Oil here

Fig 17a

Fig 17c

Fig 17b

Oil here

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 45 46

Sem comentários

Sharp R-310J Manual do Operador Página 22