Sharp R-230L Instruções de Operação descarregar pdf (Página 14)

7.1 Standard vertical cut

– Optimum cutting length

– No tight diamond wire radius in the

concrete

– Average cutting performance

– Normal rate of wire wear

7.2 Vertical cut with release

pulley

step

– Relatively short cutting / contact

length

– High cutting performance

– High rate of wire wear

Note

When the kerf is at the height of

pulley , the pulley should be

turned and positioned below the

wire.

step

Note

At the end of the cut, when the dia-

mond wire is pulled out of the kerf, it

is caught by pulleys  and .

– No danger of the wire lashing

back

– Avoids damage to the wire

Note

The optimum cutting length for the Hilti DS-WSS 30 wire saw system is 1 to 4.5 metres, i.e the diamond wire is

in contact with the workpiece over a length of 1 to 4.5 metres.

Water

WaterRelease pulley

Diamond wire

Tension side

Diamond wire

Tension side

Diamond wire

Tension side

Release pulley





7. Basic applications

Printed: 08.07.2013 | Doc-Nr: PUB / 5069762 / 000 / 01

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Sem comentários

Sharp R-230L Instruções de Operação Página 14