Sharp R-205M Manual do Operador descarregar pdf (Página 17)

Great Plains Mfg., Inc. Table of Contents ► Section 1: Assembly

1/22/2005 Series VII 6330-6548 Field Cultivator, Floating Hitch 560-205M

Inside Wing and Wheel Arm Assembly

Bolt the inside wing frames (1) Figure

2, to the center frame with two 1 x 6 hex bolts

(2) with nylon lock nuts (3). Draw the nuts

down tight but do not torque

Once the wings are attached, insert the

wheel arm bracket (4) into the wing frame

hangers and secure it just as you did on the

center with 1 1/4 x 6 pins (5). Secure the pins

with 3/8 x 2 1/4 Gr.8 hex bolts (6) & top lock

nuts.

Install the wing walking beam assembly

(7) as shown in Figure 2 with the 14” spindle

(6330 & 6332) or 18” spindle (6537-6548)

toward the front and 13” spindle on the back..

Secure the pivot spindle in the sleeve with the

5/16 x 3 clevis pin (8) and 1/8 x 1 cotter. Use

anti-seize material on spindles

Bolt the 9.5L x 15, 8-ply tire (9) in

place with the 1/2 x 1 1/4 lug bolts (10). On

model 6332, bolt the 11” bolt on stub (12) to

the wing frame using 5/8 x 1 1/2 hex bolts (13),

using lock washers and hex nuts.

Figure 2

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 61 62

Sem comentários

Sharp R-205M Manual do Operador Página 17