Sharp R-202M Manual do Operador descarregar pdf (Página 8)

Important Safety Information Table of Contents ► Great Plains Mfg., Inc.

Series VII 6113-6328 Field Cultivator, Rigid Hitch 560-202M 9/18/2003

Safety Rules

• Thoroughly read and understand the

instructions in this manual before operation.

Read all instructions noted on the safety

decals.

• Be familiar with all Series VII Field Cultivator

functions.

• Operate machinery from the driver’s seat

only.

• Do not leave Series VII Field Cultivator unat-

tended with tractor engine running.

• Do not transport the field cultivator until

the transport position and transport pins

and all wing locks are installed.

• Limit transport speed to 20 m.p.h.

• Know the transport height of your unit and be

extremely careful of overhead electrical and

telephone lines when transporting the unit.

• Know the transport width of your machine and

the width of bridges, etc… on the transport

route.

• Make sure that no one is near the machine

during field operation and folding or unfolding

of wing sections.

• Prior to removing any lift cylinders from the

machine, lower implement to the ground, shut

off the tractor and release the pressure in the

lines.

• Do not depend on cylinders to hold the weight

of machine during storage; use the transport

locks.

• Do not walk or stand on any part of the

machine. Never allow anyone to ride on the

field cultivator.

• Use extreme care when hitching or unhitching

the machine from the tractor. In some

situations with a heavy finishing attachment,

the machine may tip backward causing the

hitch to rise rapidly.

• Never stand with feet under any part of the

machine.

• Never allow anyone to walk between the

tractor and field cultivator while machine is in

operation.

• Keep hands and feet away from cultivator

sweeps. They are quite sharp.

• Any moving piece of equipment is potentially

dangerous. Do not operate until you are

absolutely sure the area is clear of children,

pets and irresponsible persons.

• Escaping hydraulic fluid under pressure can

have sufficient force to penetrate the skin,

causing serious injury. To prevent injury

when working with hydraulics, follow the

instructions on page 3.

• Before transporting the unit on public roads,

check to make sure the safety reflectors are

clean and visible, and not missing or

damaged. Turn on tractor warning lights

when transporting.

• Make sure all safety signs are clean, readable

and not damaged. Contact Great Plains Mfg.

for free replacements if necessary.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 40 41

Comentários a estes Manuais

Sem comentários

Sharp R-202M Manual do Operador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Micro-ondas Sharp R-202M