Sharp R-880S Manual do Operador descarregar pdf (Página 48)

Unit Operation

The Standard Display

The Standard Display is the default display that appears if no

other display function is selected. The Standard Display shows

the box temperature and setpoint. The box temperature is that

measured by the return air sensor. The box temperature and

Box Temperature Icon are shown in the upper display. The

setpoint and Setpoint Icon are shown in the lower display. The

box temperature in Figure 23 is 35.8 F (2.1 C) with a 35 F (1.6

C) setpoint.

Figure 23: Standard Display

Changing the Setpoint

From the Standard Display, press the UP ARROW Key and/or

DOWN ARROW Key until the desired setpoint is shown. In

Figure 24 the setpoint has been increased to 40 F (4.4 C) using

the UP ARROW Key.

Figure 24: UP ARROW Key

When the desired setpoint has been selected using the UP

ARROW Key or DOWN ARROW Key, the ENTER Key must

be pressed to confirm and load the new setpoint.

• If the setpoint is changed using the UP ARROW Key and

DOWN ARROW Key, the setpoint display will begin to

flash 10 seconds after the last press of the UP ARROW or

DOWN ARROW key as a reminder to press the ENTER

Key.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 110 111

Sem comentários

Sharp R-880S Manual do Operador Página 48