Sharp DX-C400 - Color - All-in-One Manual do Utilizador descarregar pdf (Página 16)

Sharpdesk Mobile V1.3 Operation Manual for Apple iPhone

III. The following settings can be set in “Operation Settings.”

Set to “I(ON)” in “Profile Automatic Delete” if you wish to delete the

destination on the scanner after scan is completed.

Setting to “I(ON)” in “Auto Profile Update” overwrites the

destination that was registered at last scanning without

confirmation.

Set to “I(ON)” in “Save Imported Files” if you want this application

to keep the file received from other application for printing from this

application.

Setting to “I(ON)” in “Auto Printer/Scanner Selection” automatically

selects the default printer/scanner that is tied to a wireless network

(SSID) to which the device connects.

Set to “I(ON)” in “High Quality Print” if you prefer quality for

printing.

Set to “I(ON)” in “Use Raw Print” if you wish to use Raw port

(default port number is 9100) instead of FTP port (default port

number is 21) for printing.

At “Default Name for Automatically Added Printer/Scanner” you

can set the display format for the printers/scanners that are

automatically added(see section 4.1). “Product Name(Location)” or

“Product Name(IP Address)” can be selected.

IV. “SNMP Settings” is required to set if the network to which your

device is connected uses other than default SNMP GET

Community string.

Set to “O(OFF)” in “Public Get Community” if you use this

application in such a network, and set strings that are used in the

network in “Enter Community String(s).” Up to 10 strings can be

set.

Note: If you need assistance, ask your network administrator about

SNMP GET Community string.

V. Tap "Save" to save the settings.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Sem comentários

Sharp DX-C400 - Color - All-in-One Manual do Utilizador Página 16