Sharp DX-C400 - Color - All-in-One Manual do Utilizador descarregar pdf (Página 10)

Sharpdesk Mobile V1.3 Operation Manual for Apple iPhone

III. Tap “Add Manually” if you wish to add any printers/scanners that

are not in the same network segment as your device (cannot be

added on “Find Printers/Scanners.”).

IV. Enter Name, IP Address and Port Number to add a

printer/scanner. IP Address and Port Number are required to be

entered.

If Name is not entered, IP Address is set as the value of the Name

field.

If "Set as Default Printer/Scanner" is checked, the default

printer/scanner is set to this printer/scanner when you use "Print"

or "Scan". Tap "Save" to save the settings. If you wish to cancel

the addition, press "Back" button before tapping "Save."

Note: The IP address that has already been added manually cannot be

entered.

Note: “Set as Default Printer/Scanner” cannot be configured if “Auto

Printer/Scanner Selection” is set to “I(ON)” in “Application Settings”

(see Chapter 6).

Note: Port number is necessary to print from this application. Enter

the same port number as configured on the printer. If different port

number is entered, this application cannot print to the printer.

To check the port number in the printer:

If “Use Raw Print” in “Application Settings” is set to “O(OFF)”: See

[Application Settings]-[Setting for Print from the PC] in the printer’s

Web page. The default port number for both printer and this application

is 21.

If it is set to “I(ON)”: See [Network Settings]-[Print Port Settings]-[RAW]

tab in the printer’s Web page. The default port number is 9100.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 37 38

Sem comentários

Sharp DX-C400 - Color - All-in-One Manual do Utilizador Página 10