Sharp ER-A770 Guia de Instalação descarregar pdf (Página 11)

PrPr

ammingamming

amming

Page / 9

Designs and specifications are subject to change without notice.

1. Device Configuration - CAT#2:

Place the ER-A770 into SRV mode:

1) Select 2 SETTING

2) Select 1 DEVICE ASSIGN

3) Select 15 CAT#2

4) Set the Channel No. followed by depressing the [ENTER] key.

Note: the RS-232 port which the Debitek Card Reader is physically connected (Refer to pg. 2).

*** for this example CH#1 is used.

5) Depress [CANCEL] to exit to the SRV SETTING Sub-Menu.

6) Depress [CANCEL] again to exit to the SRV MODE Sub-Menu.

7) Depress [MODE] to exit to the REG MODE.

SRV MODE PROGRAMMING

1234

2. SRV Mode System Presets:

Place the ER-A770 into SRV mode;

1) Select 2 SETTING

2) Select 2 SYSTEM PRESET

3) Set the following values;

a) Job#906: = 0xxx

b) Job#916: = x4xx

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Sem comentários

Sharp ER-A770 Guia de Instalação Página 11