Sharp QT-CD161 Especificações descarregar pdf (Página 300)

Your dealer will know the kind of wheel you need.

Each new wheel should have the same

load-carrying capacity, diameter, width, offset

and be mounted the same way as the one

it replaces.

If you need to replace any of your wheels, wheel

bolts or wheel nuts, replace them only with

new GM original equipment parts. This way,

you will be sure to have the right wheel, wheel

bolts and wheel nuts for your vehicle.

{CAUTION:

Using the wrong replacement wheels,

wheel bolts, or wheel nuts on your vehicle

can be dangerous. It could affect the

braking and handling of your vehicle,

make your tires lose air and make you

lose control. You could have a collision

in which you or others could be injured.

Always use the correct wheel, wheel bolts,

and wheel nuts for replacement.

Notice: The wrong wheel can also cause

problems with bearing life, brake cooling,

speedometer or odometer calibration,

headlamp aim, bumper height, vehicle ground

clearance, and tire clearance to the body

and chassis.

{CAUTION:

Rust or dirt on a wheel, or on the parts to

which it is fastened, can make wheel nuts

become loose after a time. The wheel

could come off and cause a crash. When

you change a wheel, remove any rust or

dirt from places where the wheel attaches

to the vehicle. In an emergency, you can

use a cloth or a paper towel to do this;

but be sure to use a scraper or wire brush

later, if you need to, to get all the rust or

dirt off.

300

1 2 ... 295 296 297 298 299 300 301 302 303 304 305 ... 395 396

Comentários a estes Manuais

Sem comentários