Sharp QT-CD161 Especificações descarregar pdf (Página 267)

3. Fill the coolant surge tank with the proper

mixture, to the COLD FILL line. Wait about

ﬁve minutes, then check to see if the level is

below the COLD FILL line. If the level is

below the line, add additional coolant to bring

the level up to the line. Repeat this procedure

until the level remains constant at the

COLD FILL line for at least ﬁve minutes.

4. With the coolant surge tank pressure cap off,

start the engine and let it run until you can

feel the upper radiator hose getting hot.

Watch out for the engine cooling fan.

By this time, the coolant level inside the

coolant surge tank may be lower. If the level

is lower than the COLD FILL line, add more of

the proper mixture to the coolant surge tank

until the level reaches the COLD FILL line.

5. Then replace the pressure cap. Be sure the

pressure cap is hand-tight and fully seated.

See your dealer, if necessary.

267

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 395 396

Comentários a estes Manuais

Sem comentários