Sharp PN-Y475 Instruções de Operação descarregar pdf (Página 41)

The Power LED is ashing in red and green alternately.

• Whentheinternaltemperatureofthemonitorrises

excessively, the brightness of the backlight decreases

automaticallyinordertopreventhigh-temperature-related

problems.Whenthisoccurs,thePowerLEDashesred

and green alternately.

• Iftheinternaltemperaturerisesfurther,themonitor

automaticallyentersstandbymode.(ThePowerLED

continuesashingredandgreenalternately.)

• Removethecauseoftheexcessivetemperaturerise.

-Ifthemonitorentersstandbymodeduetoarisein

temperature, to return to normal display, turn the power

switch off and then back on again. The monitor, however,

will enter standby mode again if the cause of the

temperature rise is not eliminated. (See page 8.)

-Checkwhetherthemonitorisplacedatalocationwhere

a quick rise in temperature is likely. Internal temperature

rises quickly if the vents on the monitor are blocked.

-Internaltemperaturerisesquicklyifdustaccumulates

insidethemonitororaroundthevents.Removedustif

possible.AskSHARPdealeraboutremovinginternaldust.

Troubleshooting

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48 49

Sem comentários

Sharp PN-Y475 Instruções de Operação Página 41