Sharp PN-L601B Manual de Instruções descarregar pdf (Página 41)

■TosetfromaPC

WhenthemonitorisconnectedtoaPC,LANsettingscanbe

conguredviaPC.

Set up process

(1)ConnectyourmonitortoaPC

(2)SpecifythePC’sIPaddress

(3)Congurethemonitor’sLANsettings

(1) Connecting your monitor to a PC

ConnectacommerciallyavailablecrossoverLANcable

(UPTcable,Category5)totheLANportonthePCandthis

monitor.

LAN cable (commercially available, crossover)

To LAN terminal

LAN terminal

(2) Specifying the PC’s IP address

Tocongurethemonitor’sLANsettings,youmusttemporarily

changethesettingsonthePC.

ThisexplanationisbasedonWindows7.

1. LogontothePCwithanadministratoraccount.

2. Click[Start],andthenclick“ControlPanel”.

3. Click“Viewnetworkstatusandtasks”in“Networkand

Internet”.

In“ClassicView”,click“NetworkandSharingCenter”.

4. Click“LocalAreaConnection”andthen“Properties”.

5. Click“InternetProtocolVersion4(TCP/IPv4)”andthen

“Properties”.

6. Make a note of the current IP address, subnet mask, and

default gateway settings.

Make sure you write this information now as you will

be changing the IP address, subnet mask, and default

gateway settings back to these settings afterwards.

7. Temporarily change the IP address and subnet mask.

To access the monitor as it is shipped from the factory, set

as follows.

• IPAddress:192.168.150.3

• SubnetMask:255.255.255.0

• DefaultGateway:(leaveblank)

8. Click[OK]andthenrebootthePC.

TIPS

• Thismonitorisfactorypresetasshownbelow.

 IPAddress :192.168.150.2

 SubnetMask :255.255.255.0

 DefaultGateway :0.0.0.0

(3)Conguringthemonitor’sLANsettings

AccessthemonitorusingInternetExplorer.

Controllingthemonitor

1. Turn the power ON to the monitor.

2. SetRS-232C/LANSELECTontheSETUPmenutoLAN.

PCoperation

3. LaunchInternetExplorer,inthe“Address”boxtype

“http://192.168.150.2/”andpresstheEnterkey.

You will be prompted to enter a user name and password.

4. Leave the user name and password boxes blank and click

[OK].

Controlling the Monitor with a PC (LAN)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 53 54

Comentários a estes Manuais

Sem comentários

Sharp PN-L601B Manual de Instruções Página 41

Comentários a estes Manuais

Manuais e produtos relacionados com Processadores Sharp PN-L601B