Sharp DX-B450P Manual do Utilizador descarregar pdf (Página 110)

8-22 User’s Guide

Compact Flash (CF) Card

Accessories

9. Connect the power cord to the wall outlet.Turn the printer power switch to the ON <I>

position. When ready the printer may advise to press the select key to format the hard

drive. This has to be done so that the hard drive can be used.

The installation of your Hard Disk option in your printer is now complete.

Compact Flash (CF) Card

1. Carefully review the safety precautions in the front of this guide before starting this

installation procedure.

2. Ensure that the printer power switch is set to the OFF <O> position.

3. Disconnect the power cord from the wall outlet.

4. Remove the inside panel (see “Memory Expansion Module” on page 8-20).

5. Locate the CF socket as shown below. Align the CF Card with the socket and carefully

insert the card

. Carefully align the Compact Flash card to the socket so that the notch on

both sides of the Compact Flash are uppermost and insert into the socket.

6. Reinstall the side covers in reverse order (see “Memory Expansion Module” on page

8-20– Steps 3, 4, and 5).

7. Connect the power cord to the wall outlet. Turn the printer power switch to the ON <I>

position.

8. When ready, the printer may advise to press the select key to format the Compact Flash.

The installation of the CF Card option in your printer is now complete.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 145 146

Sem comentários

Sharp DX-B450P Manual do Utilizador Página 110