Sharp SYSTEM 8/10 Plus Instruções de Operação Página 24
- Página / 78
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Extron • System 8/10 P
LUS
• User’s Manual
Rear Panel Connections
S-Video Input Connections
S-Video or S-VHS is typically an output from the AV source on a 4-pin miniature
DIN type connector which must be converted to 2 BNC type connectors – one for
chrominance (C) and the other for luminance (Y) - [Extron adapter cable 26-353-
01]. S-Video input to the System 8/10 PLUS is made by connecting the chroma
(C) to the H/HV/C input connector and the luminance (Y) to the G/Video/Y input
connector. Audio inputs from the AV source are made to either the R & L inputs
of the System 8/10 P
LUS or to the R/R-Audio and B/L-Audio BNC connectors.
Input Selection Switches
Each input must be configured. This is done by setting the DIP switches located
above the output connectors. There are two banks of DIP switches, each having
8 (or 10) switches. Each input channel has two switches assigned to it, one in
each bank. For example, input #3 uses the third switch at each bank. For the S-
Video input shown below (S-Video signal connected to channel 3 input), the #3
DIP switch of S-Video/S-VHS bank should be in the up (Video) position and the
#3 DIP switch of the NTSC/PAL should be in the down (RGBS) position.
Place the S-Video/S-VHS switch for the input channel being configured in the
Video (up) position. The NTSC/PAL switch for this channel (input 3, in this
example) must be in the down position.
When the System 8/10 PLUS selects this input, the LED next to the output
marked “S-Video” will light. See arrow in illustration below.
_______ If audio input uses the Phoenix connector, the output must also use the Phoenix
connector. If the input uses BNC connectors, the output must also use BNC
connectors.
S-Video Input
2-9
- System 8/10 Plus 1
- Safety Guide 2
- Getting Started 3
- Contents 4
- CONTENTS 5
- Appendix B - Reference 6
- Legend of Icons 7
- Chapter One 9
- Introduction 10
- System 8 PLUS 10
- Introduction to System 8/10 P 11
- Features 11
- Specifications 13
- Packing List 14
- Chapter Two 15
- Rear Panel Overview 16
- Rear Panel Connections 17
- Applications 18
- Input Configurations 19
- Video Output Connections 20
- Audio Connections 21
- RGB Input 22
- NTSC/PAL Input 23
- S-Video Input Connections 24
- Video Loop Back (VLB) 25
- Video Loop Back 26
- Special Features 27
- Rack Mounting 28
- Chapter Three 29
- Projector Control Port 31
- Comm Adapters 32
- Extron Comm Adapters 33
- Extron • System 8/10 P 34
- • User’s Manual 34
- _____ Notes 34
- Chapter Four 35
- Controlling the Switcher 36
- Front Panel 37
- Miscellaneous 38
- Chapter Five 39
- Multiple Switcher Operation 40
- Looping Two Switchers 41
- Daisy Chain Connection 42
- Daisy Chain Configuration 43
- Star Connection 44
- Star Configuration 45
- Looping with System 4 46
- Appendix A 49
- RS-232 Programming Guide 50
- Protocol 50
- Related Terms 51
- Command/Response Table 52
- Error Response Codes 53
- Command and Response List 54
- Appendix B 55
- Manual Remote Operation 56
- Related Parts List 57
- Changing SW1 Switch Settings 58
- Changing the Host Baud Rate 59
- Reference 60
- Infrared Remote Installation 60
- Infrared Remote Operation 61
- Projector Control Upgrade 62
- Main Controller Upgrade 63
- Enlever le couvercle 64
- Câbler sur un rack 65
- Entfernung der Abdeckung 66
- Glossary of Terms 69
- Extron's Warranty 77
Manuais e produtos relacionados com Comutadores de rede Sharp SYSTEM 8/10 Plus
Comutadores de rede Sharp VC-488NS Manual do Utilizador
(137 páginas)
(137 páginas)
Atec Narda-NBM-520 manuály
Uživatelské manuály a uživatelské příručky pro Zařízení Atec Narda-NBM-520.
Poskytujeme 1 manuály pdf Atec Narda-NBM-520 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais