Sharp MX-7500N Manual do Utilizador descarregar pdf (Página 10)

4) When the adjustment is completed, a completion

message appears.

1.1.6.2 Registration Adjustment (Manual)

1) Select [Manual] in the Registration Adjustment screen.

2) Select the tray to set the adjustment pattern and tap

[Execute] to print the adjustment pattern.

3) An adjustment pattern is printed.

Note:

When the printing of an adjustment pattern fails, the

following message appears: Printing test patch has

failed. Use A3 or 11" X 17" paper for this adjustment.

Press [Execute] to print the test patch.

4) Enter the desired value and tap the [Register] key to

After Registration.] checkbox is checked, adjustment

result is printed.

Example of Registration Adjustment screen

Input range: [1] to [99]

Default: [50] for each

Note:

When the printing of the adjustment result fails, the

following message appears: Printing adjustment

result has failed. Use A3 or 11" X 17" paper. Press

[Execute] to print the adjustment result.

1.2 Density Adjustment

Select [Density Adjustment] in the Image Quality

Adjustment screen.

1.2.1 Density Adjustment Automatic Execution

Frequency

This makes a setting of frequency (condition) to perform

density adjustment (process control) automatically.

1) Select [Density Adjustment Automatic Execution

Frequency] in the Density Adjustment screen.

2) When job efficiency is prior, set Density adjustment

during job to [No]. When image stability is prior, set

Density adjustment to [Yes].

Note:

Even if the Density adjustment during job is set to

[No], density adjustment may execute by machine

state.

3) When the density adjustment during job is set to [Yes],

tap the [+] and [-] keys or use the 10-key pad appears

when each of the textboxes is tapped to change the

execution frequency of the density adjustment.

Density adjustment during job:

[Yes]: The process control adjustment interrupts the job

in progress.

[No]: The process control adjustment does not interrupt

the job in progress.

Default: [No]

Execution Frequency:

Input range: [-2] to [2]

Default: [0]

Note:

When the density adjustment while a job is in

progress is set to [No], the execution frequency is

greyed out with the default value displayed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Comentários a estes Manuais

Sem comentários

Sharp MX-7500N Manual do Utilizador Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Impressora multifunções Sharp MX-7500N