Sharp MX-7500N Manual do Utilizador

MX-6500N MX-7500N Administrator Machine Adjustment Guide Please keep the manual in a safe place where it will

10 4) When the adjustment is completed, a completion message appears. 1.1.6.2 Registration Adjustment (Manual) 1) Select [Manual] in the Registr

11 4) To reflect the settings, the machine needs to reboot. When the [Register] key is tapped, a message appears prompting you to reboot the machin

12 1) Select [Fusing Temperature Settings] in the Fusing Adjustment screen. 2) To change the fusing temperature setting, tap the [+] and [-] key

13 1.4.2 Secondary Transfer Current Value Setting This performs toner transfer adjustment by fine tuning secondary transfer current value. 1) Sel

14 4) Referring to the adjustment pattern, select the colour and density point to adjust. Enter the desired value and then tap the [Execute] key.

15 5) When adjustment is completed, you will return to the Image Quality Adjustment screen. After adjustment, tap the [Execute] button again, print

16 5) When the adjustment is completed, the dither pattern selection screen appears. Example of Copy Calibration by dither pattern screen. 6) S

17 1.5.6 Colour Copy Black Component Amount Adjustment This performs adjustment of black component amount in colour copy. By decreasing the black c

18 1.6 Other Functions Select [Other Functions] in the Image Quality Adjustment screen. 1.6.1 Main Charger Cleaner Operation This performs main cha

19 2 Image Position/Ratio/Area Adjustment Select [Image Position/Ratio/Area Adjustment] in the Machine Adjustment screen. 2.1 Ratio Adjustment Sel

Caution The Machine Adjustment is provided assuming that an administrative user who has sufficient knowledge for machine main

20 2.2.2 Scan Original Edge Adjustment (Duplex Single Pass Feeder) This performs edge (scanning start) position adjustment for scanning original fr

21 2.3.3 Duplex Single Pass Feeder Image Loss Amount Settings This performs adjustment of image loss amount for scanning original from document fee

22 Note:  LCT Tray 1, LCT Tray 2, LCT Tray 3, LCT Tray 4, LCT Bypass Tray and LCC are displayed only when the options are installed.  To return

23 3 Peripheral Adjustment Select [Peripheral Adjustment] in the Machine Adjustment screen. Adjustable options: The saddle finisher, trimming modu

24 Input range: [50] to [150] (1 = 0.1 mm) Default: [100] 3.1.3 Fold Position Adjustment for Saddle Fold This performs fold position adjustment

25 Input range: [80] to [120] (1 = 0.20944 mm) Default: [100] 3.2 Trimming Module Select [Trimming Module] in the Peripheral Adjustment screen.

26 3.3.2 Paper Alignment Width Adjustment for Staple Position This performs jogger width adjustment for staple (paper width direction). 1) Select

27 2) Adjust the paper jog amounts for the paper skew adjustment in high accuracy mode. The 10-key pad appears when each of the textboxes is tapped

28 Input range: [36] to [60] (1 = 0.5 mm) Default: [48] Diagram showing the accordion fold position 3.5.4 Double Fold Position Adjustment T

29 4 Print Setting Value List The current setting values and the factory defaults for the items in the machine adjustment can be printed. Select

3 Table of Contents1 Image Quality Adjustment ...

ADJ-EX-2

4 2.3 Void Area Adjustment ... 20

5 Purpose of Document This document is for explaining the content, procedure and caution on each adjustment so that users in charge of machine maint

6 Machine Adjustment 1 Image Quality Adjustment Select [Image Quality Adjustment] in the Machine Adjustment screen. 1.1 Laser Adjustment Select [L

7 Note: It is recommended to perform Auto Adjustment several times. (2 to 3 times) All colours can be adjusted simultaneously. In the factory defaul

8  [Middle] is recommended. Note: To return your preferences to the factory defaults, tap the [Return Density Smoothing Adjustment Value to Defau

9 Example of Correction Amount Display (Densitometer/Visual Adjustment) screen Input range: [0] to [100] Default: 50 3) Tap the [Back] key to ret