Sharp XV-Z10E Especificações descarregar pdf (Página 57)

-55

Appendix

Removing and Installing

the Lamp Unit

Info

• Be sure to remove the lamp unit using the

handle. Be sure not to touch the glass sur-

face of the lamp unit or the inside of the pro-

jector.

• To avoid injury to yourself and damage to the

lamp, be sure to carefully follow the steps

below.

• Do not loosen other screws except for the

lamp unit cover and lamp unit.

• Please refer to the installation manual in-

cluded with the lamp unit.

1 Press on the projector or

on the remote control to put

the projector into the standby

mode.

• Wait until the cooling fan stops.

Warning!

• Do not remove the lamp unit from the

projector right after use. The lamp will

be very hot and may cause burn or in-

jury.

2 Disconnect the power cord.

• Unplug the power cord from the AC

socket.

• Leave the lamp until it has fully cooled

down (about 1 hour).

3 Change the air filter.

• Change the air filter whenever you install

the lamp unit (see pages 61 and 62).

4 Remove the lamp unit cover.

• Turn the projector over. Loosen the user

service screw (for lamp unit cover) (1)

that secures the lamp unit cover. Press-

ing the tab, remove the lamp unit cover

(2).

1

2

Tab

Lamp unit cover

User service screw

(for lamp unit cover)

BQC-PGB10S//1

Lamp

unit

STANDBY button

AC socket

XV_Z10E_E_p52_62.p65 03.11.7, 4:19 PM55

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 72 73

Comentários a estes Manuais

Sem comentários